Up until the filler plate install there was zero rust on the bumper, however since the filler plate was installed rust has been showing up around the top 5 screws. Unfortunately the filler plate was not direct bolt on and a little modification was needed. Out of 7 bolts only 3 were able to be installed without drilling. The top outside screws were blocked by an angled support piece of the bumper and the screw would not fit through the hole.
Also, the bottom two mounting tabs did not line up with the factory skid plate mounting holes which looks like what Warrior had in mind. Drilling and tapping was required to mount the bottom to bolts. I’m still thinking about the best way to deal with the rust issues that have cropped up, I’ll update the FJC Magazine Facebook Page when I figure out a solution.
To get your copy of the April 2013 issue of FJC Magazine:
FIND US ON: